AlgoLaser 1064nm Infrared Laser Module for Metallic Engraving

• Metals (immediate marking): Chrome steel, aluminum, brass, titanium, copper, nickel, and some alloys.


• Anodized aluminum: Eliminates the anodized layer to expose bare aluminum (white/silver mark).


• Darkish plastics: ABS, polycarbonate, and many engineering plastics.


• Coated metals: Powder-coated or painted metals (eliminates coating to expose bare metallic).


• Wooden and leather: Can engrave, but blue lasers are often extra successful for these resources.


• Stone and glass: Confined final results; greatest with CO2 or blue diode lasers.

Not all metals mark equally. Stainless-steel offers the most beneficial significant-contrast dim marks. Aluminum may possibly develop a lighter gray mark. Brass and copper deliver dark marks but might call for a number of passes. Normally examination first.

H3: Proposed Options for Common Resources

Options change determined by your certain laser energy (watts) and content. Commence with these common tips and change:

• Stainless-steel (dim mark): eighty-100% electrical power, 500-1000 mm/min pace, one pass.


• Aluminum (gentle mark): 70-90% electric power, 800-1500 mm/min pace, 1-two passes.


• Brass (dim mark): ninety-a hundred% energy, four hundred-800 mm/min pace, 1-two passes.


• Anodized aluminum (white mark): thirty-fifty% electric power, one thousand-2000 mm/min speed, one move.


• Dim plastic: 20-40% power, 500-one thousand mm/min pace, one move (be careful not to soften).

Normally use LightBurn or LaserGRB program to control your laser. These packages let fantastic-tuning of energy and velocity.

H4: Protection Precautions for 1064nm Infrared Lasers

The AlgoLaser 1064nm Infrared Laser Module Alpha MK2 emits invisible laser radiation. This is much more unsafe than obvious lasers since you can't see the beam. Eye problems can manifest instantly without any warning. Adhere to these basic safety guidelines:

H3: For Prototype Stores and Engineering Groups

Prototyping usually calls for marking serial figures, logos, or Directions on steel areas. Sending pieces out for marking takes time and expense. With all the AlgoLaser 1064nm module in the shop, you could mark parts in-dwelling within just minutes. For USA engineering teams, this speeds up enhancement and lowers expenses. The module is compact plenty of to fit on the benchtop laser engraver.

H3: For the people Previously Owning a Diode Laser Engraver

If you have already got a diode laser (Ortur, AtomStack, Sculpfun, NEJE, and so forth.), the AlgoLaser 1064nm module is a straightforward update. You maintain your existing body, controller, and electricity supply. Just swap the module and begin engraving steel. This is considered the most Value-effective solution to insert metallic engraving ability on your existing setup. For United states makers who definitely have now invested inside of a diode laser, this improve is actually a no-brainer.

H2: Technical specs of your AlgoLaser 1064nm Infrared Laser Module Alpha MK2

Here i will discuss the complete Check the price complex particulars for your AlgoLaser 1064nm Infrared Laser Module Alpha MK2. Use this details to compare with other infrared modules.

H2: Frequently Requested Questions on the AlgoLaser 1064nm Infrared Laser Module Alpha MK2

H3: Am i able to engrave chrome steel Together with the AlgoLaser 1064nm module?

Certainly. Chrome steel is among the finest materials for this infrared module. The 1064nm wavelength is absorbed effectively by stainless steel, making a dim, permanent mark. You may engrave logos, textual content, serial numbers, and perhaps comprehensive pics on chrome steel. No marking sprays or pre-therapy are desired. For United states enterprises that need to mark instruments, kitchenware, or industrial parts, this is a recreation-changer.

H3: Will this module get the job done with my present laser engraver?

Most probably, Sure, but Examine compatibility. The AlgoLaser 1064nm Infrared Laser Module Alpha MK2 mounts on regular 2020 or 2040 extrusion frames employed by Ortur, AtomStack, Sculpfun, NEJE, and comparable brand names. The electrical link needs a PWM-suitable controller (most are). You may have to regulate your controller options for that infrared module's electrical power curve. AlgoLaser presents documentation for well-known controllers. In case you are Uncertain, Get hold of complex support prior to acquiring.

H3: Is definitely the 1064nm beam visible?

No. The 1064nm wavelength is in the infrared spectrum, absolutely invisible to your human eye. This is hazardous as you cannot see the beam. You need to use a fully enclosed laser engraver and wear Licensed 1064nm laser basic safety glasses always. Don't trust in the pink guide laser (if equipped) for security; the actual slicing beam is invisible. USA users have to adhere to rigorous protection protocols.

H3: Exactly what is the difference between this in addition to a fiber laser?

Fiber lasers are industrial-quality, pricey (usually $5000+), and very highly effective (20W-100W+). The infrared laser for metal engraving AlgoLaser 1064nm Infrared Laser Module Alpha MK2 is really a diode-based infrared laser with decreased electricity (typically 2W-10W). It can be a great deal more inexpensive and might be included to an present diode laser body. For most smaller organization and hobbyist steel engraving wants, the AlgoLaser module is adequate. For top-volume industrial production, a fiber laser is faster and a lot more sturdy. The AlgoLaser is the greatest entry point into steel engraving.